[드라이버] ES1887 AudioDrive OS/2 Driver Version 1.03
ES1887 AudioDrive OS/2 Driver
Software Release Notes
September 16, 1996
About This Release
ESS Technology is providing updated OS/2 drivers for the
ES1887/ES1888 AudioDrive chips in this Software Release. These
drivers are complete updates to prior ESS releases for OS/2
This document provides:
- a description of the changes to the drivers
- installation notes
Please read this document completely before you upgrade your
system, and follow the instructions carefully.
Product: ES1887 AudioDrive OS/2 Device Driver,
Drivers: ES1887/ES1888 (with ESFM and wavetable)
OS: OS/2 Warp 3.0
Release Date: September 16, 1996
The ES1887 AudioDrive OS/2 Driver Software Release incorporates
new changes done to the previous release, Version 1.02.
Version 1.03 Changes
BIOS audio volume control support
The driver checks the master volume before changing it in case
the BIOS or other application has modified it.
ES1888 AudioDrive support
The ES1887 AudioDrive OS/2 driver can be used for ES1888
1. Opening too many MIDI files makes the OS/2 system unstable.
This problem is related to MMPM/2 and depends on system
resource. On systems with 8 Mbs memory, the limit is 3;
16 Mbs, 6.
2. Tempo in MIDI files may not be 100% accurate due to timing
delay and MMPM/2 architecture.
3. Running MCI commands "seek wave to #" and then "play wave" to
a 16-bit wave file sometimes generates very loud static
noise. Likewise using "record wave from #" to record a
16-bit wave file may generate wrong file. It all depends on
the seek position.
4. To be able to play and record wave files at the same time,
the enforcement of only one active wave file by MMPM/2 is
relaxed. Therefore, some problems or erratic behaviors may
pop up if two wave files are played.
5. The OS/2 driver allows sharing of audio and MPU-401
interrupts, but it is not recommended. If both are shared,
occasionally too much MIDI in data will lock up AudioDrive's
interrupt processing when a wave file is played or recorded.
To get out of this situation, stop the wave file, stop the
MIDI in source, close all MIDI files, and restart the wave
file to re-initialize AudioDrive's interrupt processing.
6. Due to the nature of MIDI music, turning MIDI in on while the
MIDI in data are coming may not generate the right sounds.
It is recommended to stop the MIDI in source first before
enable MIDI in.
To install the new drivers successfully the following steps must
1. Open an OS/2 Window and run the EINSTALL.EXE program on the
installation disk by typing "A:EINSTALL." The program first
runs ESDETECT.EXE to auto-detect the chip, then calls
ESUNINST.EXE to remove old drivers. That program will create
a backup of CONFIG.SYS named CONFIG.ESS and remove the audio
device lines from CONFIG.SYS. It also creates a backup of
MMPM2.INI named MMPM2.ESS and removes the audio drivers
information from MMPM2.INI. In addition, it removes any
other ESS driver information in COMPLIST.INI. After then,
the installation program calls Multimedia Application Install
2. When Multimedia Application Install program brings up, a
check mark beside ES1887 AudioDrive means that item is
already selected. To toggle selection, click the mouse on
the item. If WinOS2 is installed in the system, you can
select WinOS2/Windows Audio support also. If not, make sure
that item is not checked. Click the Install button to start
the installation. Once the drivers are installed, shutdown
OS/2 and reset the computer for the new ES1887 drivers to
3. If the installation cannot be completed, read the logs
EINSTALL.LOG in MMOS2INSTALL subdirectory and MINSTALL.LOG
in MMOS2INSTALL subdirectory or root directory to find out
4. Since this version of MINSTALL.EXE changes the icons of MIDI
player and Digital Video player to that of Digital Audio
player in the Multimedia folder, you may want to change them
back to the originals. To change the icon of MIDI player,
right click MIDI player to bring up the menu. Select
Settings, select General, and click the Find... button. In
the Start Folder window, enter MMOS2INSTALL. Click the
Find button and a window of all found icons appears. Select
MIDIPLAY.ICO and click OK. Close the MIDI player Settings
notebook. For Digital Video player, repeat the above steps
but select VIDPLAY.ICO instead.
5. If the MIDI plays are not smooth in WinOS2, you need to
change the timer resolution. Edit SYSTEM.INI in your Windows
directory. Under [timer.drv] are TIMERMax386Res and
TIMERMax286Res. You need to change the values to less than 8
from the default of 10.
These are the files copied to your hard disk: