Trident OS/2 Device Driver 모음

마루 0 668 05.09 00:38

Package README - Trident CYBER9320 OS/2 SBCS Device Driver


This readme file contains information on how to install the Trident

CYBER9320 OS/2 device driver. This OS/2 driver supports CYBER9320 Add-on

card and system boards that have the CYBER9320 Accelerator.


README.1ST CONTENTS:


1.0 SYSTEM REQUIREMENTS

2.0 PRELIMINARY STEPS

3.0 INSTALLATION

4.0 PROBLEM DETERMINATION & TECHNICAL SUPPORT

5.0 Trident CYBER9320 OS/2 Device Driver CONTENTS.

6.0 TRADEMARKS


1.0 System Requirements


Before you install the Trident CYBER9320 OS/2 Device Driver, make sure

that you have:

        a) installed OS/2 WARP Version 2.11 or later,

        b) 8MB of system memory

        c) 20MB of hard disk space



2.0 PRELIMINARY STEPS

(null)


3.0 INSTALLATION


This Trident OS/2 Display Drivers utility supports the following resolutions with OS/2:


                640x480x256

                800x600x256

                1024x768x256

                1280x1024x256 (2M)

                640x480x65K

                800x600x65K   (2M)

                1024x768x65K  (2M)

                640x480x16.7M



   This utility includes Trident OS/2 Display Drivers installation

   and Trident OS/2 Display Drivers setting.




   Installation Procedure


   1. Insert Trident OS/2 Display Drivers diskette in Driver A.


   From the OS/2 Desktop:


   Open the OS/2 System folder, double-click on the Drives object,

   and then double-click on driver A. When the driver A folder opens,

   double-click on INSTALL.EXE. You can also click on the floppy

   drive object from Launch Pad, and then double-click on INSTALL.EXE.


   From the OS/2 Command Line:


   Open OS/2 System folder, double-click on Command Prompts, and

   double-click on either OS/2 Window or OS/2 Full Screen. Then, at

   the command line, go to driver A and type:


        INSTALL.EXE


   and press Enter.


   2. The first page of the installation program's window is Screen

      Resolution selection page.


   . Select the resolution and color depth.


   3. The second page is Monitor Model selection page.


   . Click on Monitor tab to go to this page.

   . Point to and click on the down arrow button to show a list of

     monitor models.

   . Select the monitor model. If you cannot find your monitor's

     model, select "Default".


   4. The third page is Refresh Rate selection page.


   . Click on Refresh tab to go to this page.

   . The refresh rates displayed are the recommended refresh rate for

     each resolution by your monitor manufacturer.

   . You can change the refresh rates by clicking on down arrow button

     to select the refresh rates for corresponding resolution.


   5. The fourth page is Frame Buffer Address selection page (Vesa

      Local Bus Adapter only).


   . Click Desktop tab to go to this page.

   . Point to and click the down arrow button to show a list of

     available frame buffer address (in unit of MBytes).


   6. After the selections, click on the Install button to complete

      the installation.


   7. Reboot OS/2 to have this installation take effect.




   Display Drivers Setting Procedure



   1. Double-click on the Trident folder, and then double-click

      Display Setting object.


   2. To change resolution and/or color depth


   . Click Screen tab.

   . Select the resolution and color depth.

   . Click Set button.


   3. To change refresh rate

   . Click Refresh tab.

   . Point to and click down arrow button.

   . Select the refresh rate.

   . Click Set button to take effect.

   . If you don't want the selected refresh rate, click Undo

     button or press 'U' key to return to previous refresh rate.


   4. To change frame buffer address (Vesa Local Bus Adapter only)


   . Click Desktop tab.

   . Point to and click the down arrow button to show a list of

     available frame buffer address (in unit of MBytes).

   . Click Set button.




   If you have selected to change resolution and/or frame buffer

   address, you must reboot OS/2 to have the changes take effect.




   Note:


   If you decide to change your hardware system configuration, such

   as upgrading video memory or system memory, you should


   . Change resolution to 640x480x16(VGA).

   . Change hardware configuration.

   . Reinstall Trident OS/2 Display Drivers.




   You can add or delete monitor models by modifying TMONITOR.INF

   file in this utility diskette.


   The format of each line in this file is:


   . The monitor model and company name inside two double quote marks.

   . Four recommended refresh rates data for 640x480, 800x600,

     1024x768, and 1280x1024 resolutions.

   . Four maximum supported refresh rates data for 640x480, 800x600,

     1024x768, and 1280x1024 resolutions. If some resolutions are not

     supported, put "0" in it.



   If you add a line


        FrameBufferAddress=xxx


        where xxx is frame buffer address in unit of MBytes


   into TR_AGI.INF file, display drivers will set frame buffer to

   this address.


4.0 Problem Determination & Technical Support


Contact information:


        Trident Microsystems, INC.

        189 N. Bernardo Ave.

        Mountain View, CA 94043


        Tel:(415)691-9211 ( for technical support: Ext 381)

                              ( for customer support: Ext 5708)


        Fax:(415)691-9260/9265


The CYBER9320 is an advanced DRAM based, highly integrated 32-Bit GUI accelerator

for the 32-bit VL and PCI Local Bus interface.


OS/2 versions on the following has been tested:


        OS/2 2.11

        OS/2 Warp

        OS/2 Warp Connect

        OS/2 Warp Server



5.0 Trident CYBER9320 OS/2 Device Driver Version TF1.0 (00) Package contents:


This package contains the following files:


VERSION         -Version file

TDSPUTIL.DL_    -Trident Display Utility DLL

ALADDIN.DL_     -OS/2 Display Driver

README.DOC      -Readme file

TDSPUTIL.EXE    -Trident Display Utility

INSTALL.EXE     -Installer

BVHSVGA.DLL

TR16SWIN.DR_    -16 color WIN-OS/2 Window Driver

AGIFWIN.DR_     -256/High color WIN-OS/2 Full Screen Driver

AGITFWIN.DR_    -True color WIN-OS/2 Full Screen Driver

AGISWIN.DR_     -256/High color WIN-OS/2 Window Driver

AGITSWIN.DR_    -True color WIN-OS/2 Window Driver

TR16FWIN.DR_    -16 color WIN-OS/2 Full Screen Driver

SVGA.EXE

WIN8514.FO_

TRIDENT.ICO

TMONITOR.INF

TR_AGI.INF

VSVGA.SY_


6.0 TRADEMARKS


The following terms, denoted by an asterisk (*) in this file, are

trademarks or registered trademarks of IBM Corporation or Trident

Microsystems, INC. in the United States and/or other countries:


IBM

OS/2

CYBER9320

Comments

Category
State
  • 현재 접속자 49 명
  • 오늘 방문자 795 명
  • 어제 방문자 1,026 명
  • 최대 방문자 4,250 명
  • 전체 방문자 1,299,820 명
  • 전체 게시물 2,585 개
  • 전체 댓글수 4,133 개
  • 전체 회원수 67 명

- 쇼핑몰 : Softbox
- 예전 문서 / Old docs
Facebook Twitter GooglePlus KakaoStory NaverBand